How to Apply Transfers

To achieve the best results when applying DTF transfers to cotton shirts, polyester shirts, and poly blend fabrics, follow these guidelines for pressure, time, and temperature:
  • Cotton Shirts:
    • Heat Press Temperature: 280°F 
    • Time: 15 seconds
    • Pressure: Medium (40-50 PSI)
  • Polyester Shirts:
    • Heat Press Temperature: 260°F 
    • Time: 12-15 seconds
    • Pressure: Medium (40-50 PSI)
  • Poly Blend Shirts:
    • Heat Press Temperature: 280°F 
    • Time: 12-15 seconds
    • Pressure: Medium (40-50 PSI)
General Instructions:
  1. Pre-press the garment: Place the shirt on the heat press and pre-press for 5 seconds to remove any moisture, wrinkles and to a create a uniform press space. 
  2. Position the transfer: Place the DTF transfer on the garment with the printed side facing down.
  3. Apply the transfer: Set your heat press to the appropriate temperature, time, and pressure based on the fabric type.
  4. Press: Close the heat press and apply pressure for the specified time.
  5. Cool peel: Allow the transfer to cool completely before peeling the film off.
  6. Peeling: Create an aggressive edge and peel quickly. 
  7. Second Press: Add a cotton layer between the pressed garment and heat plate. Press for a second time for 5 seconds. This helps give the transfer the best hand feel.   

 

Following these guidelines will help you achieve vibrant, durable prints on various fabrics.